Cable•Rail Cable Assemblies & Design•Rail Aluminum Rail Kits

  cablerailmetalpostphoto cablerail cableraillakephoto 

 

Cable•Rail® (by Feeney®) Stainless Steel Cable Assemblies

  • Low maintenance and easy-to-install railing infill.
  • Manufactured in the USA.
  • Made from 1/8" type marine grade 316 stainless steel cable.
  • Replaces metal or wood railing pickets or balusters.
  • Virtually invisible for unimpaired views.
  • Installs on new or existing wood railing frames.
  • Standard length cable assemblies can be quickly trimmed to size in the field.
  • Each assembly includes easy-to-use threaded terminal and Quick-ConnectSS® fittings that remain concealed in end posts.
  • Please contact usfor design assistance.
    • Installation tips:
      • Leave 3" space at before beginning post and after ending post to allow room to access fittings.
      • Space cables 3" apart.
      • Space posts and/or balusters a maximum of 3' on center.
      • Maximum straight cable run is 50'
      • Maximum cable run with up to two corner bends is 40'.
      • Use protector sleeves to protect posts at angled transitions.

cablerailassemblyCable Assembly cablerailpolendcapsPoly End Caps cablerailstainlesscapsStainless End Caps - Dome, Chrome, Chamfer cablerailbevelwashersBeveled Washers cablerailprotectorsleevesProtector Sleevs cableraillacingneedleLacing Needle cablerailreleasetoolRelease Tool cablreailcleanerCleaner

STANDARD LENGTH STAINLESS STEEL CABLE ASSEMBLIES & ACCESSORIES

CABLE & FITTINGS FOR CUSTOM LENGTH STAINLESS STEEL CABLE ASSEMBLIES

    • Bulk stainless steel cable
    • Quick-Connect® fittings
      • Pivot fitting
        • Screws into the face of a wood post or wall using a hanger bolt with 1/4" lag thread (included).
        • 180° pivoting allows for angled stair terminations.
        • Typically paired with pivot swivel turnbuck fitting below.
      • Pivot swivel turnbuckle fitting
        • Screws into the face of a wood post or wall using a hanger bolt with 1/4" lag thread (included).
        • Tension adjusted by spinning the special swiveling turnbuckle body.
        • 180° pivoting allows for angled stair terminations.
        • Typcially paired with pivot fitting above.
      • Fixed surface mount fitting
        • Attaches to the face of a wall or post (wood screws included).
        • 130° pivoting allows for angled stair terminations.
        • Typically paired with surface mount turnbuckle fitting below.
      • Surface mount swivel turnbuckle fitting
        • Attaches to the face of a wall or post (wood screws included).130° pivoting allows for angled stair terminations.
          • Tension adjusted by spinning the special swiveling turnbuckle body.
          • Typically paired with fixed surface mount turnbuckle fitting above.

INTERMEDIATE PICKETS pickets

    • Slender, low-maintenance and time saving vertical spacer option for wood railing frames.
    • Pre-drilled to support infill cables spaced 3" apart.
    • Includes all the components needed for quick and easy installation (pre-drilled picket, 2 base plates, screws).
    • Slotted holes on stair rail pickets will accommodate a stairway slope of between 20 and 45 degrees.
    • Can be trimmed to fit railings up to 42" high.
    • High strength aluminum alloy. Silver powder coated finish.

ACCESORIES & TOOLS

 

Design•Rail® (by Feeney®) Aluminum Rail Kits

   

  • Desgned for fast and easy installation of railings with CableRail stainless steel infill between wood posts.
  • CableRail ready. Predrilled picket to support 1/8" CableRail cables.
  • East field assemply. Rails and pickets can be trimmed and assembled on-site using pre-engineered components that snap and screw together.
  • Level rail kits are for residential railings up to 42" high with up to 6' spacing between posts.
  • Stair rail kits can accommodate up to 6' stairways with slopes between 29 and 34 degrees and a height of 36".
  • Kit includes: 6' top rail, 6' bottom rail, two 3' snap caps, pre-drilled intermediate picket, four rail connecting brackets, installation hardware, and instructions.